How to deal with the floating glue of nail polish?

Clean the brush in time and use cleaning water (high quality) or 99% alcohol to clean the nail surface to reduce its dust and oil. A large number of air bubbles will be generated if the vibration is excessive, and the nail surface will be uneven if taken out immediately for use. If such problems are encountered, they should be handled in a timely manner. Use a rubber brush to gently spot the bubbles and quickly brush them down. If the speed is too fast, it is easy to generate bubbles. If the strength and speed are well controlled, the problem of uniform coating will be solved. Our nails will secrete a layer of oil to protect our nails. Before nail enhancement, we should use alcohol to remove this layer of oil. After that, we should use a "sponge file" to polish the surface to make it rough and more suitable for the attachment of adhesive primer. The polishing shall be even. If the polishing is not in place, it is easy to be warped locally or even fall off the whole piece. After polishing the nail, there will be some dust left on the nail surface. At this time, we should use a cleaning brush to clean the nail surface, or use alcohol to scrub it. Do not touch it with fingers or oily substances

How to remedy nail polish warping?

When applying nail polish, first pay attention to cleaning the nail surface, and clean up the dead skin and dust on the nail epidermis. Then apply a thin layer of primer on the surface of the nail, and then light it for 30 seconds before it can be taken out. Then apply a thin layer of colored nail polish, not too thick, for about a minute, then apply the second layer of nail polish. After one minute of light, apply the last layer of nail polish, increase the finish of the entire nail polish, and then light it for two minutes, Then wipe the nail surface with alcohol and the whole process of applying nail polish glue is completed.

SK-CJ13, nail art broken diamond solid gel