After polishing the nails, apply a layer of primer on the nail surface and then dry it with a light bulb
Then take a silver sequin nail polish adhesive, apply it to the nail surface, and dry it with a light bulb
Take white nail polish glue and apply it to one-third of the nail surface in French style
The effect is as shown in the picture after applying, remember to wrap the edges
Then use a drill pen to dip in any size drill and stick it onto the silver nail surface
Finally, apply the sealing layer and let the light dry, and the diamond nail enhancement is completed
two
How to do your own nail enhancement
First, use a nail file to polish the shape of the nail, round off the edges and corners of the nail, and try placing the artificial nail on the nail. If it doesn't match well, continue to polish until it fits.
Glue the previously selected artificial nails onto the nails with nail specific glue, fix them, and then use a nail file to polish the artificial nails into their preferred nail shape.
Apply a layer of nail polish to your nails.
Brush and apply silver glitter nail polish on your nails.
Use a cotton swab to take an appropriate amount of blue glitter and sprinkle it on the front half of the nail.
Dip a cotton swab in an appropriate amount of glitter powder and evenly sprinkle it on the nail.
Use a drill pen to coat the nails with colorful diamonds and small rhinestones, and then apply 2 layers of nail polish to complete the nail enhancement.
three
Tips and methods for nail sticking and drilling
Make sure that the nail polish or nail polish glue you applied before is completely dry, and then de stick it, otherwise it will be damaged. Use a drill pen or tweezers to suck the drill to be pasted into the triangular disc, and do not touch the drill surface with your hands
Use a toothpick or pinhole glue head to apply glue or model glue, crystal powder, and crystal liquid to the location where the water drill needs to be applied. It is recommended to use glue or model glue for small drills, and transparent crystal powder or phototherapy transparent glue for large drills. The glue does not need to be too thick, and a uniform thin layer is sufficient. Be sure to control the amount of glue, otherwise the excess part will form an unsightly offset print
Use a drill pen to stick the water drill onto the adhesive. The glue won't dry immediately, so if the position is not correct, we can still move it slightly. However, when moving, be careful not to move the excess glue to a blank place. The offset printing will be ugly, and do not make the surface of the drill stick to glue or nail polish, which will affect the brightness of the drill.
Press the drill tightly with an orange stick until the glue dries thoroughly. If you want to be more reliable, you can also add some model glue or crystal powder around the diamond, along with crystal liquid or phototherapy transparent glue. If the head of the crystal pen is too thick, you can use a carving pen to fill it. It is recommended to do this for large diamonds. When the crystal pen is used up, be sure to use pen washing water to clean it. If you use model glue, you need to take an extra step to dry it, as the glue and crystal liquid will self dry without needing to be dried.
If the diamond is not too large, you can stick the diamond first and then apply the seal layer, which is not easy to fall off. When brushing the seal layer, it is best to apply the brush back and forth several times separately at the position of the adhesive diamond, which will be even more difficult to fall off. In fact, as long as the sealing layer is not a problem, it will not affect the brightness of the diamond, so everyone does not need to worry too much. If the diamond is too large, it is recommended to seal the layer first and then stick the diamond.
After pasting a diamond in this way and fixing the diamond decoration, in order to make it both firm and beautiful, it is necessary to wait for about ten minutes and wait for it to fully solidify before moving. Do not allow the diamond accessories to hit hard objects in a short period of time.
SK-RH33, Mix Size Flat Bottom Round Nail Enhancements Diamond in 2*6 box
