one
How to Make Nails Stronger
1.Before applying the primer, be sure to apply two coats of balance solution
2. Balance fluid can dry the nails by removing the excess grease on the nail surface, so that nail polish can contact the nail surface more closely, and it is not easy to fall off. In addition, nail polish can also have the same effect by wiping the nails with nail wash water (not oily), but the best effect is the balance agent.
3. The adhesive base must be extremely small
4. There is too much easy to shrink glue, and as soon as it shrinks, the nail polish will also detach from the nail.
5. The colored glue must be very thin
The correct approach is to apply solid colors twice, and light and translucent colors three times to prevent wrinkles.
two
When do I need to wrap when doing manicures
1. Apply primer and wrap edges.
2. Apply reinforcement adhesive and wrap the edges. Based on the three functions of reinforcement glue: reinforcement, protection, and shaping, there is no limit on the number of times we apply nail polish glue.
3. After reinforcement, if the nail surface is uneven, it needs to be polished. If it is flat, it is not necessary.
4. Apply color adhesive twice, and wrap the edges every time.
5. Apply sealing adhesive and wrap the edges.
three
A Method to Make Nail Enhancements More Durable
1. Preliminary work needs to be done well
To keep the nail enhancement for a longer time, the first step is to abandon the original application method and start with the preparation work in the early stage of the nail enhancement. Wash your hands with soap and warm water without lanolin (sheep oil), then dry them with a towel. Then, use a non-fiber cotton pad (which will not shed hair) to wipe off any oil or residue that can cause nail polish to peel off. Primer is essential as it can retain nail polish for a longer period of time, prevent dark nail polish pigments from penetrating your nail cover, and ultimately help you resist the damage of nail polish remover when removed.
2. Apply nail polish thinly
When starting to apply nail polish, it is necessary to avoid applying too much or too thick. Once the nail polish dries too slowly, the solvent inside is not easy to evaporate quickly, which will make it mottled and not smooth enough. If you dislike the fact that too thin nail polish does not give a saturated color, you can apply multiple layers, but ensure that each layer is light and thin enough to achieve a vibrant color.
Firstly, apply a thin layer of nail polish, making sure to hold the brush smoothly for even application. Place the brush at the bottom of the nail near the skin, and then gently slide it towards the top of the nail. Use the same method on both sides, seal the top edge and let it dry.
Then, after the first layer of nail polish is completely dry (do not blow with your mouth! Water vapor will weaken the brightness of nail polish), start to apply the second layer from the thumb to the little finger. Starting from the thumb, try to make the entire process of applying nail polish longer, so that the first layer of nail polish has more time to dry. Finally, quickly apply a layer of bright oil.
3. It is necessary to apply bright oil
Within three days after the enhancement, apply a layer of top coat, which can increase the brightness of the enhancement while avoiding softening, making it look refreshed. If possible, apply a top coat every 3 days in the following period. This way, maintaining the nail enhancement for 2 weeks is basically not difficult.
Generally speaking, thinly applied nail polish has a longer retention time, which not only makes it easier to apply, but also makes it difficult to detect any drops. Shining sequin nail polish can also be very sturdy, with no noticeable drop. Both neutral and opaque nude colors will have a longer retention time, and you can easily catch up with the trend of this season.
4. Timely remediation
Don't let loose nails affect your mood, because even if you apply them well, falling is inevitable. Fortunately, you still have a way to remedy it. It is recommended to gently rub scratches and cracks with a polishing file, and then apply a thin layer of the same nail polish to the entire nail. Wait for it to dry for 1-2 minutes before covering it with a layer of quick drying bright oil. You can also cover it with a layer of nail polish of the same color, so that your nail enhancement will look new again.
To deal with stains on a nail enhancement, soak your fingertips in a little acetone, gently tap and flatten the stains with your fingertips, and finally apply a layer of nail polish of the same color to your nails.
four
How to make nail patches drill and stick more firmly
1. Waiting for nail polish to dry before applying diamond decoration: During nail enhancement, before applying diamond decoration, be sure to wait for the previously applied nail polish to completely dry before applying diamond decoration. Otherwise, accidentally damaging the already made nail shape will also make it easier for the diamond decoration to fall off after completion.
2. Glue used: It is best to use professional nail glue for nail enhancement. Apply a small amount of glue to the surface of the nail polish where the diamond is embedded, and wait for the glue to dry quickly. Use a drill pen to stick the diamond decoration on. Afterwards, gently dip an appropriate amount of glue with an orange stick and apply it around the diamond decoration to reinforce the surrounding area of the diamond decoration base.
3. Using professional nail tools such as drill pens and orange sticks: Professional tools are required for nail enhancement, and fingernails are not recommended. It is recommended to use a drill pen or an orange stick here. Using nail tools during operation can avoid accidentally contaminating the diamond and nail surface, and it also provides more flexibility when clamping and pasting the diamond. After pasting the diamond decoration, use a drill pen or orange stick to gently apply pressure downwards to make the diamond decoration more firm and less prone to detachment.
4. Do not use bright oil after sticking the diamond decoration: Do not touch the surface of the diamond decoration or accessories again after sticking the diamond decoration, and do not apply bright oil again. Because the surface of the diamond decoration is coated with bright oil, it will affect the glossiness and refraction of the diamond decoration.
5. Do not touch hard objects after sticking the drill After fixing the diamond decoration, we try not to let the finished nail polish hit hard objects again in a short period of time. We can wait for the nail to completely dry and the diamond decoration to dry before moving freely, which takes about ten minutes.
SK-JHJ3, 2023 Factory Price top gel base gel functional gel
