Before using nail polish magic mirror powder, a wash free sealing layer should be applied to the polished nail surface, and the light should be illuminated for 5 to 15 seconds. Do not use too short a light, otherwise the magic mirror powder will be dirty when applied, and too long a light will cause it to not be applied. The actual time needs to be tested based on the effectiveness of the magic mirror powder. After the lighting is completed, use a sponge stick dipped in the magic mirror powder to apply the sealing layer, but do not need to apply it very fully. Then, vigorously wipe the tea powder back and forth until there is a mirror effect on the surface, and stop, Wipe off excess dust, clean the nail groove, leading edge, and trailing edge, then shine and polish with a sponge, and then use a solid adhesive seal layer.
How to Use Nail Mirror Powder
1. Firstly, apply a wash free sealing layer on the polished nails, and then light them. The lighting time is usually 5-15 seconds, and the length of the time depends on whether the magic mirror powder will be dirty or difficult to rub on later, as it is easy to get dirty in a short time and difficult to apply in a long time. The time depends on the product time and effect of the magic mirror powder.
2. Secondly, on the nail surface that has been illuminated, use a sponge stick dipped in magic mirror powder to apply it. Be careful not to use it too much, and leave some gaps around because magic mirror powder does not adhere to the glue. After applying, use a sponge stick to rub the magic mirror powder to create a mirror effect. Then, sweep away excess dust and use a cotton pad to clean the nail groove, front and rear edges.
3. Finally, apply the adhesive and illuminate it. When reinforcing, it depends on the situation. If one application is not enough, it can be applied twice. However, in short, the magic mirror powder should not be too full when applying, otherwise it may be difficult to seal the magic mirror powder during reinforcement. Finally, it is necessary to seal the lamp again.
Why can't nail magic mirror powder rub against it?
The reason why the magic mirror powder cannot be rubbed against is that the front bottom adhesive light has been shining for too long. If the light is too long, the glue will dry out severely, and the magic mirror powder cannot cover it completely. Note that it does not rely on adhesion and bottom adhesive sealing layer bonding, but on covering the rear headlight, which is easy to fall off, so be careful when doing it.
SK-GP11, Hot Sale Nail Art 4 Color Solid Magic Mirror Powder 4 Color Mirror Super Glitter Nail Powder
