The nail special glue is usually used when the nail drill is used. For example, the Japanese sharp tip glue has the advantage of not damaging the nail but not being very durable. The mxbon is very firm but has some damage to the nail. The common one is the Korean 401 glue. If you only practice, you can also use transparent nail polish, which is similar to the glue material.
When choosing glue for nail point drills, the following questions should be taken into account:
1) Determine if the water drill has an electroplated coating, and specifically what material is the water drill adhered to? For example, bonding between PP/PVC/wood/metal
2) Due to the relatively small size of the water drill itself, it can be directly determined that it is a small area of bonding.
3) Determine the specific medium resistance of the product after bonding, which is the specific bonding requirements, such as bonding speed/gel color/gel viscosity/high and low temperature resistance/bonding strength requirements.
4) Determine the amount of glue used for this product, and then determine the highest cost of using glue for this product.
Generally speaking, there are specialized fast drying adhesives and slow drying water drilling adhesives; It has good bonding effect, but the cost of water drill adhesive is also not low. The bonding strength is very good, reaching the destructive force of the bonding surface.
1) Usually, quick drying glue can cure immediately, but its appearance is not very beautiful; This has something to do with the operation.
2) It is recommended to use slow drying water drill adhesive. After the adhesive solidifies, it has a certain degree of toughness and excellent adhesion fastness.
Method and steps:
Small diamond:
After the first sealing layer is illuminated, apply adhesive water to the bottom of the small drill, and then apply a second sealing layer, covering the surface of the drill.
Big diamond:
After the first sealing layer is illuminated, the adhesive water at the bottom of the large drill is applied, and a circle of phototherapy glue is stacked next to it. Then, a second sealing layer is applied, avoiding the surface of the drill.
Strongly recommend our new type of drill gel, SK-JS9 which will last for a long time and not harm your hands
