How to do laser powder nail art tutorial

Preparation: nail file, sponge toss, dead skin scissors, dead skin push, hand brush, primer, sealer, reinforcement glue, laser powder, color glue you want to apply, (gel water or 97% alcohol), led nail lamp

step:

(1) Nail buffing and trimming type A - push up the dead skin and cut it off with dead skin scissors - throw the sponge on the nail surface - brush off the dust on the nail surface (clean it with alcohol)

(2) Apply primer to the light - (rub off the floating glue with alcohol) apply the color glue you want to apply once, or twice - (do not wipe the floating glue in this step) Dip it with a small sponge stick with a laser powder tape Appropriate amount of laser powder is applied or patted on the nail surface-hand brush to remove excess dust-apply reinforced glue light-apply seal layer

Tips:

1. If there is no parentheses, you don't need to prepare it. Of course, it is the best.

2. Apply whatever color of glue you want to reverse the color of the light

3. The color glue can be applied once or twice, because the color can be reflected in one pass. It is only used as a base color, and the laser powder is filled in the area that is not evenly applied.

4. Regarding the number of seconds of lighting, the lighting time of each baking lamp is different. The UV lighting time is a little longer, but the hand will turn black. It is not recommended here. The LED lighting time is short, and the primer seal The lighting time is slightly longer, about 1 minute, and the remaining 30s is sufficient.

2022 New Nail Solid Laser Powder Gold Silver Titanium Gold Powder,SK-GP120